Sửa chữa Robot dân dụng
Sửa chữa Robot đồ chơi công nghệ
How config Motherboard on Marlin 1.1

How config Motherboard on Marlin 1.1

Firmware is a program which resides on the printer’s motherboard. The firmware is the link between software and hardware, it interprets commands from the G code file and controls the motion accordingly. The firmware configuration is unique to your printer. It knows the properties of the 3D printer, like the dimensions or heating settings. It plays a major role in the quality of the print.

Posted at: 31-10-2018 04:38:00 PM | Viewed: 133 | Feedback: 0 | Category: 3D Printing Experiences
3d Scan Anything Using Just a Camera or smartphone

3d Scan Anything Using Just a Camera or smartphone

There are many ways to make a 3d model, but one of the coolest is to 3d scan an existing object. With a 3d scan and the right printer you can reproduce any object at any size from a house to an earring. You can also use the scan as a starting point for a new creation. Think of everything you can do with a picture in Photoshop. Now you can do that in 3d with real stuff as well.

Posted at: 19-06-2017 11:04:03 AM | Viewed: 199 | Feedback: 0 | Category: 3D Printing Experiences
How to Create a Large 3D Printer Using a Smaller 3D Printer

How to create a large 3D Printer Using a Smaller 3D Printer

From those that own 3D printers, to those who simply are just curious about their capabilities, one topic that comes up rather frequently is the idea of "Printing another 3D Printer". Now this may not be 100% possible when considering components such as the electronics, however, nearly every 3D printer today in the open source community utilizes to some degree, 3D printed parts in it's construction.

Posted at: 24-03-2017 11:22:00 AM | Viewed: 353 | Feedback: 0 | Category: 3D Printing Experiences
Marlin firmware user guide for beginners

Marlin firmware user guide for beginners

If you built your own 3D printer or if you want to optimize its performance, you will have to put your hands in the firmware. This step can seem very tricky at first glance and put people off from doing it. In this post I will try to explain the basic steps required to run a 3D printer. To show you how simple it can be, we will modify only one file and we will only change configuration options and numbers.

Posted at: 07-02-2017 09:30:00 AM | Viewed: 753 | Feedback: 0 | Category: Technology 3D printing news , 3D Printing Experiences
Stick with it... 3D Printing for ABS & PLA

Stick with it... 3D Printing for ABS & PLA

This post contains an overview of the more common materials used as a 3D printing build surface. Plenty of tips and advice and we also take a look at a how well a bed coating 'skin' called 3D EeZ performs. And it's also a general call out for any other bed formula's or materials to test or experiment with. I hope you find it useful.

Posted at: 17-12-2016 08:31:00 AM | Viewed: 389 | Feedback: 0 | Category: 3D Printing Experiences
How to Resume a 3D Print Job from last layer

How to resume 3d printing from last layer

So, to avoid having to reprint the model from a scratch and replacing the tape and wait time to heat the bed and cry over wasted filament i decided to just resume the print from its last layer.

Posted at: 14-12-2016 09:24:00 AM | Viewed: 208 | Feedback: 0 | Category: 3D Printing Experiences
Experience 3d printing for newbie (Extend)

Experience 3d printing for newbie (Extend)

So i want to turn off the bed at some layer height or layer # to prevent my tape from pealing off... How do that?

Posted at: 07-12-2016 11:20:00 AM | Viewed: 298 | Feedback: 0 | Category: 3D Printing Experiences
Slic3r - Settings and Extruder Calibration

Slic3r - Settings and Extruder Calibration

This part developing Slic3r very quickly so this guild may be a little out of date, but hopefully may still help you get started if you are new to 3D printing, it's certainly the easiest route for an easy tool-chain to great looking prints.

Posted at: 03-12-2016 11:43:11 PM | Viewed: 770 | Feedback: 0 | Category: 3D Printing Experiences
Stepper Motor Module using L293D H-Bridge v1

Stepper Motor Module using L293D H-Bridge v1

This project is designed to allow you to create a reusable module for Bi-Polar Stepper applications based on a L293D H-Bridge. An H-bridge is a circuit that allows you to reverse the polarity of a DC circuit. They're used to control the direction of motors.

Posted at: 01-12-2016 09:04:00 AM | Viewed: 288 | Feedback: 0 | Category: 3D Printing Experiences
3D Slicer Settings for Beginners

3D Slicer Settings for Beginners PI

Proper 3D slicer settings can mean the difference between a successful print, and a failed print. That’s why it’s so important to know how slicers work and how each different setting will affect your results.

Posted at: 30-11-2016 09:49:07 AM | Viewed: 428 | Feedback: 0 | Category: 3D Printing Experiences
Fine Calibration & Software for Mendel type PIV

Fine Calibration & Software for Mendel type PIV

And then we will talk about Cura as alternative slicer option. It is always better having two slicers available in your system.

Posted at: 27-10-2016 10:37:32 AM | Viewed: 225 | Feedback: 0 | Category: 3D Printing Experiences
Fine Calibration & Software for Mendel type PIII

Fine Calibration & Software for Mendel type PIII

Now we will see how we can finally finetune our 3D printer using the configured Slic3r.

Posted at: 27-10-2016 10:28:00 AM | Viewed: 222 | Feedback: 0 | Category: 3D Printing Experiences
Fine Calibration & Software

Fine Calibration & Software for Mendel type PII

Now we will talk about the fine calibration and software tools that we need in order to start printing.

Posted at: 27-10-2016 10:20:47 AM | Viewed: 543 | Feedback: 0 | Category: 3D Printing Experiences
Fine Calibration & Software

Fine Calibration & Software for Mendel type PI

Let's start with the coarse calibration of the machine. It is now time to connect the y tray with the z axis. Turn simultaneously by hand the two motors of the z axis in order to port the nozzle at least 3 cm above the y tray.

Posted at: 27-10-2016 09:48:00 AM | Viewed: 339 | Feedback: 0 | Category: 3D Printing Experiences
3D delta printer improvements (X/Y calibration, temperature)

3D delta printer improvements (X/Y calibration, temperature)

This articles describes how to improve your printer’s position accuracy. Additionally, you can improve overall print precision by improving your printer’s extruder accuracy.

Posted at: 27-10-2016 09:29:43 AM | Viewed: 722 | Feedback: 0 | Category: 3D Printing Experiences
MatterControl

A standalone 3D printing controller powered by MatterControl

What's the correct procedure, in my case, for properly re-calibrating the bed? How did the team who assembled the printer get to that magical 1.45mm value? What adjustments do I need to make to the supports on the Z-Axis in order to get a consistent Z-Axis offset again? I am using MatterControl.

Posted at: 27-10-2016 09:23:45 AM | Viewed: 195 | Feedback: 0 | Category: 3D Printing Experiences
 

About us

About us We provide 3D printers for retail and wholesale, We produced and assembled at Hanoi, Vietnam with many type: Cube, Delta, Mendel, scara, robot arm, custom by client...  - Repair 3D printers - Provide 3D printing materials...

1 1 1